SMC Networks SMC6724L3 Show ip dvmrp route, 299, Dmvrp routes are shown in the following example

MULTICAST ROUTING COMMANDS

Example

The default settings are shown in the following example:

Console#show route dvmrp
Admin Status	: enable
Probe Interval	: 10
Nbr expire	: 35
Minimum Flash Update Interval	: 5
prune lifetime	: 7200
route report	: 60
Default Gateway	: 0.0.0.0
Metric of Default Gateway	: 1
Console#

show ip dvmrp route

Use this command to display all entries in the DVMRP routing table.

Command Mode

Normal Exec, Privileged Exec

Example

DMVRP routes are shown in the following example:

Console#show ip dvmrp route
Source	Mask	Upstream_nbr Interface Metric UpTime Expire

--------------- --------------- --------------- --------- ------ ------ ------

10.1.0.0	255.255.255.0	10.1.0.253	vlan1	1	84438	0
10.1.1.0	255.255.255.0	10.1.1.253	vlan2	1	84987	0
10.1.8.0	255.255.255.0	10.1.0.254	vlan1	2	19729	97

Console#

Field	Description
Source	IP subnetwork that contains a multicast source, an upstream router,
	or an outgoing interface connected to multicast hosts.
Mask	Subnet mask that is used for the source address. This mask
	identifies the host address bits used for routing to specific subnets.
Upstream_nbr	The IP address of the network device immediately upstream for
	one or more multicast groups.
Interface	The IP interface on this router that connects to the upstream
	neighbor.
Metric	The metric for this interface used to calculate distance vectors.

4-299