Alarms
Alarms
Any time a Fault / Warning occurs, a combination of LED’s will illuminate to notify you there is a problem and help identify the kind of Fault / Warning has occurred.
•Faults and Warnings will not automatically clear.
•To clear an fault, press and hold the RESET button on the display button pad for 3 seconds.
•To clear a warning press and immediately release the RESET button.
Fault / Warning Scenarios
The following pages describe the most likely fault / warnings you could receive.
Alarm Type | What it Looks Like | What it Indicates | Solution | |||
Low Level |
|
|
|
| Level of lubricant in | Add lubricant to reservoir. |
Warning |
|
|
|
| reservoir is low and addi- | After lubricant |
HH | MM | SS | ## | ! | tional lubricant needs to be | |
|
|
|
| added. | is added, | |
|
|
|
|
| ||
|
|
|
|
|
| press the |
| ON |
| OFF |
| Unit continues to operate | RESET but- |
|
|
| as normal for a limited | ton to clear the warning. | ||
MM : SS | HH : MM |
| ||||
| period of time until a low |
| ||||
|
|
|
|
|
| |
|
|
|
|
| level alarm is triggered. |
|
CP 1 |
|
|
CP 2 | C | 1 2 3 |
CP 3 | P |
|
332305B | 57 |
