Graco 332305B important safety instructions Viewing the UNIT DMS ID Number

Max Model Setup

9.G3 pump restarts cycle in the OFF mode.

10.Remove the USB flash drive.

11.After the USB flash drive is removed, press and hold the UP and DOWN ARROW but- tons for 3 seconds to enter the SETUP MODE (see Entering Setup Mode, page 29).

12.In SETUP MODE, set the YEAR, MONTH, DATE and TIME (see Setting the Real Time Clock, page 30).

13.After pressing the ENTER button to set the TIME, press the RESET button to exit the SETUP MODE.

Viewing the UNIT DMS ID Number

1.In RUN mode, press and hold the DOWN ARROW button.

2.The Unit DMS ID number displays. The unit continues to normal operation while the DMS ID is displayed.

3.Release the DOWN ARROW button after viewing the DMS ID number.

38 332305B