Graco 332305B Common Functional Summary Data entries are listed below

Operation / Data Log

Common Functional Summary Data entries are listed below.

Number of Cycles	The number of lubrication cycles
	the unit has started.
Total Run Hours	Total amount of hours the pump
	has been in the ON mode of the
	ON/OFF cycle.
Total Powered On Hours	Total number of hours that the
	unit has been powered on.
Local Manual Run	The number of times the manual
	run button was pressed.
Remote Manual Run	The number of times the remote
	manual run button was pressed.
Average Run Time	The average amount of time per
	lubrication cycle that the pump
	has been running (MM:SS).
Average Cycle 1 Time	The average amount of time the
	unit has been operating before
Average Cycle 2 Time
	the specified feedback for the
Average Cycle 3 Time
	sensor input was received (prox-
	imity switch counts in divider
	valve systems and pressure
	switch activation in injector sys-
	tems).
Average Duty Cycle	The average percentage of time
	the unit has been pumping while
	it has been powered on.
Max Duty Cycle	The highest percentage of time
	for one lubrication cycle that the
	unit has been pumping while it
	has been powered on.
Total Low Level Faults	Total number of low level faults.
Total Cycle Pressure	Total number of faults related to
Faults	sensor feedback in an injector or
	divider valve system.
Total Other Faults	Faults other than low level or
	sensor feedback.
Total Fault Hours	Number of hours the system has
	been powered on in fault mode.
Total Low Level Warnings	Number of low level warning
	conditions.
Total Cycle Pressure	Total number of warning condi-
Warnings	tions related to sensor feedback.
	This is only applicable if fault
	retries are used.
Total Other Warnings	All other warnings including tem-
	perature and motor current.

332305B 43