Graco 332305B important safety instructions Cycle Pressure Fault, Machine Count Fault

Alarms

Cycle /

Pressure

Fault

HH MM SS ##

ON OFF

MM : SS HH : MM

CP 1
CP 2	C	1 2 3
CP 3	P

!

In pressure mode indi- cates that unit is over pres- surized or a lubrication cycle was not completed in the user-defined amount of time.

In cycle mode indicates that a cycle was not com- pleted in the user-defined amount of time.

LED corresponding to the affected sensor input blinks.

Could be more than one sensor alarm at the same time.

Examine system to deter- mine if you have a plugged or broken line or other component failure, i.e., divider valve, injector.

Press and hold the RESET but- ton to clear fault.

Machine Count Fault

HH MM SS ##

ON OFF

MM : SS HH : MM

CP 1
CP 2	C	1 2 3
CP 3	P

!

Unit has not received the correct number of machine counts in the user defined Backup Time.

Examine system to deter- mine if the machine sen- sor is operating properly.

Press and hold the RESET but- ton to clear fault.

332305B 59