•An LED flashes under
either HH when pro- |
| |
gramming hours OR |
| |
MM when program- | OR | |
ming minutes. | ||
|
•In SETUP MODE the
number displayed in the first field, on the
left side of display blinks, indicating the 
device is ready to pro- gram the Backup Time hours.
•The total amount of Backup Time must
be at least twice as long as the pro- grammed ON Time. If a value less than twice the ON Time is entered, the
RED alarm LED lights and the value must be updated.
If this time does not meet the application needs, contact Graco Customer Support.
Programming Backup Time
NOTE: When programming a Backup Time of less than 10 hours you must program a leading zero in the first number field and press the ENTER button to save the zero selection.
1.To set the Backup Time use the UP or DOWN ARROW button to scroll through numerals 0 to 9 until the desired number appears in the first HH (hour) field.
2.Press the ENTER button to lock in the selection. The next HH number field to the right flashes indicating it is ready for programming.
3.Use the UP or DOWN ARROW button to scroll through numerals 0 to 9 until the desired number appears in the second HH number field.
4.Press the ENTER button to lock in the selection.
The next number field to the right
flashes and the LED lights under MM; indicating it is ready to program the minutes fields.
Max Model Setup
5.Repeat steps 1 - 4 to set the next MM (minutes) fields.
6.After pressing the ENTER button to set the last MM field, the OFF Time informa- tion is saved.
7.After selecting ON, refer to page 32.
NOTE: Backup time can be set in HH:MM for the machine count input.
OFF Time
•The LED next to the clock in the OFF field lights, indicating you are setting the OFF Time parameters.
•OFF Time is set in Hours and Minutes (HH: MM).
•An LED flashes under
either HH when pro- |
| |
gramming hours OR |
| |
MM when program- | OR | |
ming minutes. | ||
|
•In SETUP MODE the
number displayed in 
the first field, on the 
left side of display blinks, indicating the 
device is ready to pro- gram the OFF Time hours.
•The total amount of OFF Time must be
at least twice as long as the pro- grammed ON Time. If a value less than twice the ON Time is entered, the
RED alarm LED lights and the value must be updated.
If this time does not meet the application needs, contact Graco Customer Support.
Programming OFF Time
NOTE: When programming a time of less than 10 hours you must program a leading zero in the first number field and press the ENTER button to save the zero selection.
332305B | 35 |
