Programming

Main menu

Sub-menu 1

Sub-menu 2

Page

Initial settings

Other settings

Key tone*8

*

 

<On>

 

 

 

 

 

 

 

Auto talk*9

17

 

 

<Off>

 

 

 

 

 

 

 

Caller ID edit

24

 

 

<On>

 

 

 

 

 

Customer support

29

+

 

 

 

 

 

 

 

*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.

*2 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.

*3 When the ringer volume is turned off, ~is displayed and the handset does not ring for outside calls.

However even when the ringer volume is turned off, the handset rings:

at the minimum level for alarm and intercom calls

at the maximum level for paging

*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers.

*5 The preset melodies in this product are used with permission of © 2006 Copyrights Vision Inc.

*6 If you select one of the melody ringer tones, the ringer tone will continue to sound for several seconds if the caller hangs up before you answer. You may hear a dial tone or no one on the line when you answer a call.

*7 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at “700 ms” unless pressing {FLASH} fails to pick up the call waiting call.

*8 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones.

*9 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.

Alarm

An alarm will sound at the set time for 3 minutes in two different alarm modes: Once or Daily. Set the date and time beforehand (page 15).

1{MENU} (center of joystick) i Ki {SELECT}

2{V}/{^}: “Alarmi {SELECT}

3{V}/{^}: Select the desired alarm mode. i {SELECT}

28For assistance, please visit http://www.panasonic.com/help

Page 28
Image 28
Panasonic KX-TG8231, KX-TG8232 operating instructions Alarm, Other settings Key tone*8 Auto talk*9 Off Caller ID edit