To establish a conference call: Press {CONF}.
LTo leave the conference, press {OFF}. The other parties can continue the conversation.
Answering transferred calls Press {C} to answer the page.
LAfter the paging party disconnects,
you can talk to the outside caller.
Transferring a call without speaking to the other handset user
1During an outside call, press {TRANSFER}. i Press the desired handset number.
Lkflashes to indicate the outside call is on hold.
2{OFF}
LThe outside call rings at the other handset.
Note:
LIf the other handset user does not answer the call within 1 minute, the call will ring at your handset again.
Registering a handset to a base unit
The supplied handset and base unit are
1{MENU} (center of joystick) i * i {SELECT}
2{V}/{^}: “Registration” i
{SELECT}
3{V}/{^}: “HS registration” i
{SELECT}
4Base unit:
Press and hold {x} (LOCATOR) for about 5 seconds, until the registration tone sounds.
LIf all registered handsets start ringing, press {x} (LOCATOR) to stop, then repeat this step.
LAfter pressing {x} (LOCATOR), the rest of this procedure must be completed within 1 minute and 30 seconds.
5Handset:
Press {OK}, then wait until a long beep sounds and w stops flashing. LWhen the handset has been
registered successfully, w will stop flashing. If the key tone is turned on (page 28), a confirmation tone will be heard.
Deregistering a handset
A handset can cancel its own registration (or the registration of another handset) that is stored in the base unit. This will allow the handset to end its wireless connection with the system.
1{MENU} (center of joystick) i * i {SELECT}
2{V}/{^}: “Registration” i
{SELECT}
3{V}/{^}: “Deregistration” i
{SELECT}
4{3}{3}{5} i {OK}
LThe numbers of all handsets registered to the base unit are displayed.
5Select the handset(s) you want to cancel, by pressing the desired handset number ({1} – {6}). i
{OK}
LThe selected handset number(s) flashes.
38For assistance, please visit http://www.panasonic.com/help
