SMC Networks SMC6724L3 manual 128

CONFIGURING THE SWITCH

Web – Click Priority, IP Precedence Priority. Select a port or trunk from the Interface field. Select an entry from the IP Precedence Priority Table, enter a value in the Class of Service Value field, and then click Apply.

*Mapping specific values for IP Precedence is implemented as an interface configuration command, but any changes apply to the all interfaces on the switch.

CLI – The following example globally enables IP Precedence service on the switch, maps IP Precedence value 1 to CoS value 0 (on port 1), and then displays the IP Precedence settings.

Console(config)#map		ip precedence			4-189
Console(config)#interface				ethernet 1/1	4-119
Console(config-if)#map ip				precedence 1 cos 0	4-189
Console(config-if)#end
Console#show map ip		precedence ethernet 1/5			4-194
Precedence	mapping status: disabled
Port	Precedence COS
---------	---------- ---
Eth 1/ 1		0	0
Eth 1/ 1		1	0
Eth 1/ 1		2	2
Eth 1/ 1		3	3
Eth 1/ 1		4	4
Eth 1/ 1		5	5
Eth 1/ 1		6	6
Eth 1/ 1		7	7
Console#

*Mapping specific values for IP Precedence is implemented as an interface configuration command, but any changes apply to the all interfaces on the switch.

3-128