SMC Networks SMC6724L3 manual Binding a Port to an Access Control List

Models: SMC6724L3

1 618
Download 618 pages 36.53 Kb
Page 97
Image 97

ACCESS CONTROL LISTS

Binding a Port to an Access Control List

After configuring Access Control Lists (ACL), you can bind the ports that need to filter traffic to the appropriate ACLs. You can only assign one IP access list and/or one MAC access list to any port.

Command Attributes

Port – Fixed port or module. (Range: 1-26)

IP – Specifies the IP ACL to bind to a port.

MAC – Specifies the MAC ACL to bind to a port.

Web – Click ACL, ACL Port Binding. Mark the Enable field for the port you want to bind to an ACL, select the required ACL from the drop-down list, then click Apply.

CLI – This examples assigns an IP and MAC access list to port 1, and an IP access list to port 2.

Console(config)#interface ethernet

1/1

4-119

Console(config-if)#ip access-group

david in

4-81

Console(config-if)#mac access-group jerry in

4-87

Console(config-if)#exit

 

 

Console(config)#interface ethernet

1/2

 

Console(config-if)#ip access-group

david in

 

Console(config-if)#

 

 

 

 

 

3-49

Page 97
Image 97
SMC Networks SMC6724L3 manual Binding a Port to an Access Control List