SMC Networks SMC6724L3 manual Dhcp Commands, Dhcp Client, Ip dhcp client-identifier

DHCP COMMANDS

DHCP Commands

These commands are used to configure Dynamic Host Configuration Protocol (DHCP) client, relay, and server functions. You can configure any VLAN interface to be automatically assigned an IP address via DHCP. This switch can be configured to relay DHCP client configuration requests to a DHCP server on another network, or you can configure this switch to provide DHCP service directly to any client.

Command	Function	Page
Group
DHCP Client	Allows interfaces to dynamically acquire IP address	4-97
	information
DHCP Relay	Relays DHCP requests from local hosts to a remote	4-99
	DHCP server
DHCP Server	Configures DHCP service using address pools or static	4-102
	bindings

DHCP Client

Command	Function	Mode	Page
ip dhcp	Specifies the DHCP client identifier for this	IC	4-97
client-identifier	switch
ip dhcp restart	Submits a BOOTP or DHCP client request	PE	4-98
client

ip dhcp client-identifier

Use this command to specify the DCHP client identifier for the current interface. Use the no form to remove this identifier.

Syntax

ip dhcp client-identifier {text text hex hex} no ip dhcp client-identifier

•text - A text string. (Range: 1-15 characters)

•hex - The hexadecimal value.

4-97