SMC Networks SMC6724L3 Default Setting, Permit, deny Ip access-group4-81 show ip access-list4-83

ACCESS CONTROL LIST COMMANDS

•extended – Specifies an ACL that filters packets based on the source or destination IP address, and other more specific criteria.

•acl_name – Name of the ACL. (Maximum length: 16 characters)

Default Setting

None

Command Mode

Global Configuration

Command Usage

•An ACL can contain either all permit commands or all deny commands.

•When you create a new ACL or enter configuration mode for an existing ACL, use the permit or deny command to add new rules to the bottom of the list. To create an ACL, you must add at least one rule to the list.

•To remove a rule, use the no permit or no deny command followed by the exact text of a previously configured rule.

•An ACL can contain up to 32 rules.

Example

Console(config)#access-list ip standard david

Console(config-std-acl)#

Related Commands

permit, deny 4-78

ip access-group(4-81) show ip access-list(4-83)

4-77