SMC Networks SMC6724L3 manual 291, Syntax Router dvmrp no router dvmrp Command Mode

MULTICAST ROUTING COMMANDS

Command	Function	Mode	Page
show ip dvmrp route	Displays DVMRP routing information	NE,	4-299
		PE
show ip dvmrp	Displays DVMRP neighbor information	NE,	4-300
neighbor		PE
show ip dvmrp	Displays DVMRP configuration settings	NE,	4-301
interface	for the interfaces	PE

router dvmrp

Use this command to enable Distance-Vector Multicast Routing (DVMRP) globally for the router and to enter router configuration mode. Use the no form to disable DVMRP multicast routing.

Syntax

router dvmrp no router dvmrp

Command Mode

Global Configuration

Command Usage

This command enables DVMRP globally for the router and enters router configuration mode. Make any changes necessary to the global DVMRP parameters. Then specify the interfaces that will support DVMRP multicast routing using the ip dvmrp command, and set the metric for each interface.

Example

Console(config)#router dvmrp
Console(config-router)#end
Console#show router dvmrp
Admin Status	: enable
Probe Interval	: 10
Nbr expire	: 35
Minimum Flash Update Interval	: 5
prune lifetime	: 7200
route report	: 60
Default Gateway	: 0.0.0.0
Metric of Default Gateway	: 0
Console#

4-291