SMC Networks SMC6724L3 manual Syntax Clear ip dhcp binding address

COMMAND LINE INTERFACE

Command Usage

This command identifies a DHCP or BOOTP client to bind to an address specified in the host command. BOOTP clients cannot transmit a client identifier. To bind an address to a BOOTP client, you must associate a hardware address with the host entry.

Example.

Console(config-dhcp)#hardware-address 00-e0-29-94-34-28 ethernet Console(config-dhcp)#

Related Commands

host (4-113)

clear ip dhcp binding

Use this command to delete an automatic address binding from the DHCP server database.

Syntax

clear ip dhcp binding {address *}

•address - The address of the binding to clear.

•* - Clears all automatic bindings.

Default Setting

None

Command Mode

Privileged Exec

Usage Guidelines

•An address specifies the client’s IP address. If an asterisk (*) is used as the address parameter, the DHCP server clears all automatic bindings.

•Use the no host command to delete a manual binding.

•This command is normally used after modifying the address pool, or after moving DHCP service to another device.

4-116