SMC Networks SMC6724L3 manual 130

CONFIGURING THE SWITCH

Web – Click Priority, IP DSCP Priority. Select a port or trunk from the Interface field. Select an entry from the DSCP table, enter a value in the Class of Service Value field, then click Apply.

*Mapping specific values for IP DSCP is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

CLI – The following example globally enables DSCP Priority service on the switch, maps DSCP value 0 to CoS value 1 (on port 1), and then displays the DSCP Priority settings.

Console(config)#map			ip dscp	4-191
Console(config)#interface ethernet 1/1				4-119
Console(config-if)#map ip dscp 1 cos 0				4-191
Console(config-if)#end
Console#show map ip			dscp ethernet 1/5	4-195
DSCP mapping status: disabled
Port	DSCP COS
--------- ---- ---
Eth 1/ 1	0	0
Eth 1/ 1	1	0
Eth 1/ 1	2	0
. Eth 1/ 1	3	0
.
. Eth 1/ 1	61	0
Eth 1/ 1	62	0
Eth 1/ 1	63	0
Console#

*Mapping specific values for IP DSCP is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

3-130