![](/images/new-backgrounds/1224632/22463265x1.webp)
■
You can transmit to the latest Programme numbers (PR) data to the VCR with the
Caution:
∙Only when the
∙Only when the
1Turn on the VCR.
2Press the button.
The data transmission begins.
The
When the T-V LINK menu is changed over to another menu:
The menu operation at the TV side is completed and it is shifted to the menu operation at the VCR side. Refer to the VCR Instruction Manual and operate the VCR.
Note:
∙If “FEATURE NOT AVAILABLE” appears at the
rect; then press the button to retry data transmis- sion.
−Has the
−Has the VCR power been turned on?
−Does the SCART cable that is connected to the
■ !"#$ %&'
When connecting a Decoder with a
1Turn on the Decoder power.
2Display the TV channel capable of being unscrambled with the Decoder on the TV.
Even if the Decoder is functioning, a scrambled picture appears at this time.
3Press the button to display the MENU.
The MENU (main menu) appears.
4Press the buttons to choose FEA- TURES. Then press the button.
The FEATURES menu appears.
5Press the buttons to choose DECOD- ER
An unscrambled picture appears.
To cancel the DECODER (EXT-2) function:
Press the buttons to choose OFF.
6Press the button to complete the set- ting.
The
7Follow the operating procedure “Down- loading the data to VCR” on page 33 to transmit the Programme number (PR) data to the VCR.
8If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 through 7.
Note:
∙If for some reason the DECODER
−Has the Decoder been connected to the VCR properly according to the VCR and Decoder In- struction Manuals?
−Has the Decoder power been turned on?
−Can the TV channel be unscrambled with a De- coder?
−Is it necessary to change the VCR settings in or- der to connect the Decoder? Confirm that the VCR is set properly by rechecking the VCR In- struction Manual.