JVC AV-32WFR1EK, AV-28WFR1EK Basic Operation, To return to a TV channel, Use the button

BASIC OPERATION

2Press the ￿￿and￿￿buttons to choose a Programme number (PR). Then press the ￿ button.

Note:

∙For Programme numbers (PR) with the CHILD LOCK function set, the ￿(CHILD LOCK) mark is displayed next to the Programme number (PR) in the PR LIST

∙You cannot use the ￿buttons to choose a Pro- gramme number (PR) with the CHILD LOCK fun- tion set.

∙Even if you try to choose a Programme number (PR) with the CHILD LOCK function set, the ￿ (CHILD LOCK) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHILD LOCK” on page 26.

∙If the picture is tilted, correct it. See “PICTURE TILT” on page 19.

■￿￿$￿￿￿￿￿￿￿￿%￿￿￿￿￿

Press the ￿buttons to adjust the vol- ume.

The Volume indicator appears and the volume changes as you press the –/+buttons.

■&￿￿￿￿￿￿￿￿￿￿￿￿!￿￿￿￿￿'￿￿￿￿￿￿￿

￿￿%￿￿￿￿

Choose an EXT terminal to which the desired external device has been connected.

Use the ￿button:

Press the ￿button to choose an EXT terminal. Pressing the ￿button changes the choice as follows:

TV mode EXT modes

Programme	EXT-1	EXT-2
numbers
PR 1 – PR 99
	EXT-4	EXT-3

Use the ￿buttons:

Press the ￿buttons to choose an EXT terminal

Use the PR LIST:

1 Press the ￿ (Information) button to display the PR LIST.

2Press the ￿￿and￿￿buttons to choose an EXT terminal. Then press the ￿button.

Note:

∙The EXT terminals are registered after the Pro- gramme number PR 99.

∙You can choose a video input signal from the S-VID- EO signal (Y/C signal) and regular video signal (composite signal). For details, see “￿(S-VIDEO input)” on page 24.

∙If you do not have a clear picture or no colour ap- pears, change the colour system manually. See “COLOUR SYSTEM” on page 18.

∙When choosing an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.

∙This TV set has a function which can automatically change over the input according to a special signal output from an external device.(The EXT-4 terminal does not support it.)

To return to a TV channel:

Press the ￿button, the ￿buttons or the Number but- tons.

To use the Programme number PR 0 (AV):

When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) al- lows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 29.

Pressing the ￿button changes the choice as follows:

TV mode EXT modes

Programme	PR 0	EXT-1	EXT-2
numbers
PR 1 – PR 99
		EXT-4	EXT-3

Note:

∙The VCR RF channel is sent as the RF signal from the VCR.

∙Also refer to your VCR instruction manual.

￿