To display the FEATURES menu:
1Press the button to display MENU
(main menu).
2Press the button to choose FEATURES.
Then press the button.
■
■■
■
You can set the TV to automatically turn off after a specified
period of time.
1Press the buttons to choose SLEEP
TIMER. Then press the button.
A Sub-menu of the SLEEP TIMER function appears.
2Press the buttons to set the period of
time.
You can set the period of time a maximum of 120 min-
utes (2 hours) in 10 minute increments.
To cancel the SLEEP TIMER function:
Press the button to set a period of time to “OFF.”
3Press the button to complete the set-
tings.
The menu disappears.
Note:
•The SLEEP TIMER lamp lights while the SLEEP TIM-
ER function is operating.
•One minute before the SLEEP TIMER function turns
off the TV, “GOOD NIGHT!” appears.
•The SLEEP TIMER function cannot be used to turn
off the TV’s main power.
•When the SLEEP TIMER function is on, you can dis-
play the Sub-menu of the SLEEP TIMER function
again to confirm and/or change the remaining peri-
od of time of the SLEEP TIMER function. Press the
button to exit the menu after confirming and / or
changing the remaining time.
■
■■
■$
$$
$
$
$$
$
#
##
#
You can set the TV to automatically change to a blue screen
and mute the sound if the signal is weak or absent, or when
there is no input from an external device.
1Press the buttons to choose BLUE
BACK.
2Press the buttons to choose ON.
To cancel the BLUE BACK function:
Press the buttons to choose OFF.
3Press the button to complete the set-
ting.
The menu disappears.
■
■■
■
(
((
(
#
##
#
When there is a TV channel you wish your children not to
watch, you can use the CHILD LOCK function to lock out the
TV channel. Even when a child chooses a Programme num-
ber (PR) in which a locked TV channel has been registered,
the screen will change to blue and displays (CHILD LOCK)
so the TV channel cannot be viewed. Unless you enter a pre-
set ID number by a special operation, the lock cannot be re-
leased and the child cannot view the TV channel programs.
1Press the buttons to choose CHILD
LOCK. Then press the button.
“SET ID NO.” (ID number setting screen) appears.
2Set the ID number to your liking.
1Press the buttons to choose a number.
2Press the buttons to move the cursor.
3Press the button.
The Sub-menu of CHILD LOCK appears.
WFR1EK_E2.fm Page 26 Wednesday, February 16, 2000 2:36 PM