JVC AV-32WFR1EK, AV-28WFR1EK specifications Press buttons to choose PRO Logic 3D-PHONIC

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

To display DIGITAL SURROUND:

1 Press the ￿ button to display MENU (main menu).

2Press the °/5 button to choose DIGITAL SURROUND. Then press the ￿button.

Note:

∙Connecting the headphones to the TV automatically changes to the HEADPHONE SURROUND function cor- responding to the current DIGITAL SURROUND function. However, the PRO LOGIC 3D-PHONIC function and DOLBY PRO LOGIC function are changed over to the 3D HEADPHONE function so that the headphones cannot play back the Dolby Pro Logic Surround sound properly.

■￿￿￿￿￿￿&￿￿￿￿￿'￿(￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

The PRO LOGIC 3D-PHONIC function lets you enjoy the at- mosphere of Dolby Pro Logic surround sound without addi- tional surround speakers.

With the PRO LOGIC 3D-PHONIC function, you can use the rear surround-channel signal of the Dolby Surround encoded programme to create the surround sound image as if sur- round speakers were located at your right and left.

Change the setting of the PRO LOGIC 3D-PHONIC function

1.Press the ￿ buttons to choose

PRO LOGIC 3D-PHONIC. Then press the ￿ button.

The Sub-menu of the PRO LOGIC 3D-PHONIC function appears.

2.Press the ￿ buttons to choose an item. Then press the ￿ buttons to change the setting.

MODE:

The PRO LOGIC 3D-PHONIC function has three modes; NORMAL, CINEMA/SPORT, and MUSIC. You can choose and set a mode as you like.

LEVEL:

You can control the effect level of the PRO LOGIC 3D- PHONIC function as you like.

LEFT/CENTRE/RIGHT:

You can adjust the sound level of each speaker sepa- rately. LEFT/RIGHT denotes left and right of the Front speakers and CENTRE denotes the Centre speaker.

Use the PRO LOGIC 3D-PHONIC func- tion

1Press ￿ buttons to choose PRO LOGIC 3D-PHONIC.

To cancel the PRO LOGIC 3D-PHONIC function:

Press the ￿buttons to choose SURROUND OFF.

2Press the ￿ button to complete the set- tings.

The menu disappears.

Note:

∙The PRO LOGIC 3D-PHONIC function does not work properly except for the Dolby Surround encoded programmes.

∙The 3D lamp lights while the PRO LOGIC 3D-PHON- IC function is operating.

∙You can turn on or off the PRO LOGIC 3D-PHONIC function by a single press. For details, see “4 3D Button” on page 12.

3.Press the ￿ button to complete the set- ting.

The menu disappears.

Note:

∙To change the TV speaker setting, you should con- nect an audio system to the TV. For details, see “Connecting Speakers/Amplifier” on page 37.

∙When an audio system is not connected to your TV, please be sure to leave the TV SPEAKER setting to L/C/R. If it is neglected, a normal sound will not come out from the TV speakers. If the TV SPEAKER is not set to L/C/R, press the ￿buttons to choose TV SPEAKER and press the ￿buttons to choose L/C/R again.

￿￿