SMC Networks SMC6724L3 Snmp-server enable traps, Issue authentication and link-up-down traps

COMMAND LINE INTERFACE

•However, some notification types cannot be controlled with the snmp-server enable traps command. For example, some notification types are always enabled.

Example

Console(config)#snmp-server host 10.1.19.23 batman

Console(config)#

Related Commands

snmp-server enable traps (4-94)

snmp-server enable traps

Use this command to enable this device to send Simple Network Management Protocol traps (SNMP notifications). Use the no form to disable SNMP notifications.

Syntax

snmp-server enable traps [authentication link-up-down]no snmp-server enable traps [authentication link-up-down]

•authentication - Keyword to issue authentication failure traps.

•link-up-down- Keyword to issue link-up or link-down traps. The link-up-down trap can only be enabled/disabled via the CLI.

Default Setting

Issue authentication and link-up-down traps.

Command Mode

Global Configuration

Command Usage

•If you do not enter an snmp-server enable traps command, no notifications controlled by this command are sent. In order to configure this device to send SNMP notifications, you must enter at least one snmp-server enable traps command. If you enter the command with no keywords, both authentication and link-up-down

4-94