SMC Networks SMC6724L3 manual Syntax Enable level, Level, Normal Exec, Disable Enable password

GENERAL COMMANDS

enable

Use this command to activate Privileged Exec mode. In privileged mode, additional commands are available, and certain commands display additional information. See “Understanding Command Modes” on page 4-6.

Syntax

enable [level]

level - Privilege level to log into the device.

The device has two predefined privilege levels: 0: Normal Exec,

15: Privileged Exec. Enter level 15 to access Privileged Exec mode.

Default Setting

Level 15

Command Mode

Normal Exec

Command Usage

•“super” is the default password required to change the command mode from Normal Exec to Privileged Exec. (To set this password, see the enable password command on page 4-34.)

•The “#” character is appended to the end of the prompt to indicate that the system is in privileged access mode.

Example

Console>enable

Password: [privileged level password]

Console#

Related Commands

disable (4-26)

enable password (4-34)

4-25