SMC Networks SMC6724L3 manual Ip igmp snooping query-count, Times

COMMAND LINE INTERFACE

ip igmp snooping query-count

Use this command to configure the query count. Use the no form to restore the default.

Syntax

ip igmp snooping query-count count no ip igmp snooping query-count

count - The maximum number of queries issued for which there has been no response before the switch takes action to drop a client from the multicast group. (Range: 2-10)

Default Setting

2 times

Command Mode

Global Configuration

Command Usage

The query count defines how long the querier waits for a response from a multicast client before taking action. If a querier has sent a number of queries defined by this command, but a client has not responded, a countdown timer is started using the time defined by ip igmp snooping query-max-response-time. If the countdown finishes, and the client still has not responded, then that client is considered to have left the multicast group.

Example

The following shows how to configure the query count to 10:

Console(config)#ip igmp snooping query-count 10

Console(config)#

Related Commands

ip igmp snooping query-max-response-time(4-203)

4-202