SMC Networks SMC6724L3 manual Gvrp and Bridge Extension Commands, Bridge-ext gvrp

GVRP AND BRIDGE EXTENSION COMMANDS

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to exchange VLAN information in order to automatically register VLAN members on interfaces across the network. This section describes how to enable GVRP for individual interfaces and globally for the switch, as well as how to display default configuration settings for the Bridge Extension MIB.

Command	Function	Mode	Page
bridge-ext gvrp	Enables GVRP globally for the switch	GC	4-175
show bridge-ext	Shows the global bridge extension	PE	4-176
	configuration
switchport gvrp	Enables GVRP for an interface	IC	4-177
switchport forbidden	Configures forbidden VLANs for an	IC	4-171
vlan	interface
show gvrp configuration	Displays GVRP configuration for the	NE,	4-178
	selected interface	PE
garp timer	Sets the GARP timer for the selected	IC	4-178
	function
show garp timer	Shows the GARP timer for the selected	NE,	4-180
	function	PE

bridge-ext gvrp

Use this command to enable GVRP globally for the switch. Use the no form to disable it.

Syntax

bridge-ext gvrp no bridge-ext gvrp

Default Setting

Disabled

4-175