SMC Networks SMC6724L3 manual Using DHCP/BOOTP

Models: SMC6724L3

1 618
Download 618 pages 36.53 Kb
Page 68
Image 68

CONFIGURING THE SWITCH

CLI – Specify the management interface, IP address and default gateway.

Console#config

 

Console(config)#interface vlan 1

4-119

Console(config-if)#ip address 10.1.0.254 255.255.255.0

4-216

Console(config-if)#exit

 

Console(config)#ip default-gateway 192.168.1.254

4-218

Console(config)#

 

 

 

Using DHCP/BOOTP

If your network provides DHCP/BOOTP services, you can configure the switch to be dynamically configured by these services.

Web – Click IP, General, Routing Interface. Specify the VLAN to which the management station is attached, set the IP Address Mode to DHCP or BOOTP. Click Apply to save your changes. Then click Restart DHCP to immediately request a new address. Note that the switch will also broadcast a request for IP configuration settings on each power reset.

Note: If you lose your management connection, use a console connection and enter “show ip interface” to determine the new switch address.

3-20

Page 68
Image 68
SMC Networks SMC6724L3 manual Using DHCP/BOOTP