Intel SDS2 manual Console Redirection Submenu Selections, Boot Device Priority Selections, 9600

Intel® Server Board SDS2 BIOS

Table 47. Console Redirection Submenu Selections

Feature	Option	Description
Serial Port Address	Disabled	When enabled, Console Redirection uses the I/O port
	On-board COM A	specified. Choosing “Disabled” completely disables
		Console Redirection.
	On-board COM B
Baud Rate	9600	When Console Redirection is enabled, use the baud
	19.2k	rate specified. When EMP is sharing the COM port as
		console redirection, the baud rate must be set to 19.2
	38.4k
		k to match EMP baud rate, unless auto -baud feature
	57.6K
		is used.
	115.2k
Flow Control	None	None = No flow control.
	CTS/RTS	CTS/RTS = Hardware based flow control.
	XON/XOFF	XON/XOFF = Software flow control.
	CTS/RTS + CD	CTS/RTS +CD = Hardware based + Carrier Detect
		flow control.
		When EMP is sharing the COM port as console
		redirection, the flow control must be set to CTS/RTS
		or CTS/RTS+CD depending on whether a modem is
		used.

6.3.2.3.5Boot Menu Selections

Boot Menu options allow the user to select the boot device. The following table is an example of a list of devices ordered in priority of the boot invocation. Items can be re-prioritized by using the up and down arrow keys to select the device. Once the device is selected, use the plus (+) key to move the device higher in the boot priority list. Use the minus (-) key to move the device lower in the boot priority list.

Table 48. Boot Device Priority Selections

Boot Priority	Device	Description
1	Removable Devices	Attempt to boot from a legacy floppy A: or removable media device
		like LS-120.
2	Hard Drive	Attempt to boot from a hard drive device.
3	ATAPI CD-ROM Drive	Attempt to boot from an ATAPI CD-ROM drive.
4	PXE UNDI	Attempt to boot from a network. This entry will appear if there is a
		network device in the system that is controlled by a PXE compliant
		option ROM.

Revision 1.2	65
Order Number:	A85874-002