Intel SDS2 manual O Device/Peripheral Configuration Submenu Selections, 3F8h, 2F8h, Epp, 378h

Intel® Server Board SDS2 BIOS

Table 41. I/O Device/Peripheral Configuration Submenu Selections

Feature	Option	Description
Serial Port 1	Disabled	If set to “Auto,” BIOS or OS configures the port.
	Enabled
	Auto
Base I/O Address	3F8h	Selects the base I/O address for COM port 1.
	2F8h
	3E8h
	2E8h
Interrupt	4	Selects the IRQ for COM port 1.
	3
Serial Port 2	Disabled	If set to “Auto”, BIOS or OS configures the port.
	Enabled
	Auto
Base I/O Address	3F8h	Selects the base I/O address for COM port B.
	2F8h
	3E8h
	2E8h
Interrupt	4, 3	Selects the IRQ for COM port B.
Parallel Port	Disabled	If set to “Auto,” BIOS or configures the port.
	Enabled
	Auto
Mode	Output only	Selects Parallel Port Mode.
	Bi-Directional
	EPP
	ECP
Base I/O Address	378h	Selects the base I/O address for LPT port.
	278h
Interrupt	5	Selects the IRQ for LPT port.
	7
DMA channel	1	Selects the DMA for LPT port.
	3
Legacy USB support	Disabled	If disabled, legacy USB support is turned off at the
	Enabled	end of the BIOS POST.
PS/2 Mouse	Disabled	If disabled, PS/2 Mouse Port will not function.
	Enabled	Should make IRQ12 available for other devices.

Revision 1.2	61
Order Number:	A85874-002