Intel® Server Board SDS2 Errata Listing

Revision 1.2

Order Number: A85874-002 107

21.
Fixed
Fab 5 Keyboard and Mouse do not function under Microsoft* Windows* 2000 when legacy USB is enabled
in BIOS setup
22.
Fixed Data miscompares when using Seagate* ATA III model ST310215A hard drives
23.
Fixed
Fab 5 Boot to service partition via modem fails
24.
Fixed
Fab 5 Secondary IDE References Added To Documentation for FAB 5
25.
No Fix
Potential Mylex AcceleRAID 352 Adaptor Card Mechanical Interference at PCI Slot 6.
26.
No Fix Bootable CD will not boot if inserted during OPTION ROM scan
27.
No Fix Bootable CD will not boot if inserted during OPTION ROM scan
28.
No Fix The “On Board” NIC BIOS controls the add in PRO100 (P100+SA) adapter card when PRO100 boot
agent is Disabled.
29.
No Fix OB P100 NICs do not show at POST but attempt PXE boot and appear in Boot Menu
30.
No Fix Dodson: Adaptec 39160 in slots 5 & 6 causes Expansion ROM error
31.
No Fix Can Not Change BIOS SETUP IDE Options Using <Enter> Key
32.
No Fix Minimum Wait Time Between Power Off and Power On via Front Panel Power Button Is One Second.
33.
Fixed Unable to boot Netware 6.0 (NW6) From CD ROM With Adaptec Adaptor 2100S in Slot 6.
34.
Fixed 3COM* 3C980C-TX NIC causes Microsoft* Windows* 2000 blue screen when greater than 4GB of
system memory is installed
35.
No Fix Peer-to-peer PCI transactions are not supported between the CIOB-controlled 64-bit PCI bus and
the legacy 32-bit PCI bus controlled by the HE-SL north bridge
36.
No Fix SDS2 PCI slot current levels supported by the 5V rail
37.
No Fix OB P100 NICs do not show at POST but attempt PXE boot and appear in Boot Menu
38.
N/A None
Following are in-depth descriptions of each erratum change indicated in the tables above. The errata and change numbers below correspond to the numbers in the tables.