Intel SDS2 manual Processor Settings Submenu Selections, Standard, Not Installed

Intel® Server Board SDS2			BIOS
	Feature	Option	Description
	Transfer Mode	Standard	Select the method for moving data to/from the drive.
		FPIO 1	This field is informational only, for Type Auto.
		FPIO 2	This field is updated to display only the modes
		FPIO 3	supported by the attached device.
		FPIO 4
		FPIO 3 / DMA 1
		FPIO 4 /DMA 2
	Ultra DMA Mode	Disabled	Selects the Ultra DMA mode used for moving data
		Mode 0	to/from the drive.Autotype the drive toselect the
			optimum transfer mode.
		Mode 1
		Mode 2
		Mode 3
		Mode 4
		Mode 5

Table 34. Processor Settings Submenu Selections

Feature	Option	Description
Processor Retest	No	If yes, BIOS will clear historical processor status and
	Yes	retest all processors on the next boot.
Processor POST	Information Only	Displays measured processor speed.
speed setting
Processor 1 CPUID	CPUID	Reports CPUID for Processor 1, if present. If empty,
	Not Installed	reports Vacant. If disabled by BMC, reports
		Disabled.
	Disabled
Processor 1 L2	Information Only	Displays L2 Cache Size for Processor 1.
Cache Size
Processor 2 CPUID	CPUID	Reports CPUID for Processor 2, if present. If empty,
	Not Installed	reports Vacant. If disabled by BMC, reports
		Disabled.
	Disabled
Processor 2 L2	Information Only	Displays L2 Cache Size for the next Processor.
Cache Size

Revision 1.2	57
	Order Number: A85874-002