Intel SDS2 manual Primary Master and Slave IDE Submenu Selections, Auto, Cdrom

BIOS			Intel® Server Board SDS2
	Feature	Option	Description
		Spanish
		Italian
		French
		German

Table 33. Primary Master and Slave IDE Submenu Selections

Feature	Option	Description
Type	Auto	Select the byte of device that is attached to the IDE.
	None	Channel.
	CDROM	If User is selected, the user will need to enter the
		parameters of IDE device (cylinders, head and
	User
		sectors).
	ATAPI Removable
	IDE Removable
	Other ATAPI
CHS format	1 to 2048	Number of Cylinders on Drive. This field is only
Cylinders		changeable for Type User.
		This field is informational only, for Type Auto.
CHS format Heads	1 to 16	Number of read/write heads on Drive. This field is
		only available for Type User.
		This field is informational only, for Type Auto.
CHS format Sectors	1 to 64	Number of Sectors per Track. This field is only
		available for Type User.
		This field is informational only, for Type Auto.
CHS format	See description	Computed size of Drive from Cylinders, Heads, and
Maximum Capacity		Sectors entered. This field is only available for Type
		User.
		This field is informational only, for Type Auto.
LBA Format	Information Only	Total number of sectors on the drive that are
Total Sectors		addressable in LBA format.
LBA Format	Information Only	Capacity of the drive while using LBA addressing.
Maximum Capacity		This value may be higher than the ‘Maximum
		Capacity’ above for drives bigger than 8.4 GB.
Multi-Sector Transfer	Disabled	Specifies the number of sectors that are transferred
	2 Sectors	per block during multiple sector transfers.
	4 Sectors	This field is informational only, for Type Auto.
	8 Sectors
	16 Sectors
LBA Mode Control	Disabled	Enable/Disable LBA instead of cylinder, head,
	Enabled	sector, addressing.
		This field is informational only, for Type Auto.
32 Bit I/O	Disabled	Enabling allows 32 bit IDE data transfers.
	Enabled	This field is informational only, for Type Auto.

56	Revision 1.2
Order Number:	A85874-002