Intel SDS2 manual Bootable CD will not boot if inserted during Option ROM scan

Intel® Server Board SDS2		Errata Listing
Problem:	Mechanical interference between the Myelex installed memory module (DIMM)
	and the onboard SCSI connector occurs if a Wide or Singled Ended SCSI cable
	is installed on embedded SCSI A or B connector. LVD SCSI cable connectors
	do not interfer.
Implication:	Mechanical interference may damage the Mylex memory module connector and
	DIMM when the Mylex AcceleRADI 352 Adaptor Card ins fully seated in PCI slot
	6 connector.
Workaround:	Insure correct SCSI cable connector is used if a cables are installed on the
	onboard SCSI connectors at SCSI A or B.
Status:	Will not fix.

26.Bootable CD will not boot if inserted during OPTION ROM scan

Problem:	During POST while the OPTION ROM scan for the on board (OB) devices and
	add in PCI adapters is in process, if an bootable CD-ROM is inserted in to he
	CD-ROM, the system will not attempt to boot to the CD-ROM. An attempt to
	boot to the floppy was made and then the OS on the hard drive booted. No
	attempt was made to boot to the bootable CDROM.
Implication:	Bootable CD-ROM must be inserted before POST begins or the system is
	reset.
Workaround:	Reset system after CD-ROM is inserted.
Status:	Will not fix.

27.Swapping bootable for non-bootable CDROM during POST causes hang at boot.

Problem:	Powered on the system with a bootable Win2k AS CD in the CDROM drive. As
	soon as the BIOS began to POST add-in cards with OPTION ROMS the
	Bootable CD was ejected and a non-bootable CD was inserted. When the
	system completed POST and attempted to boot, the floppy drive showed an
	access attempt. The system then hanged with a blinking cursor on a black
	background. The boot order was set with 1)Floppy 2) CDROM 3) Hard Drive.

Workaround:	Reset the system. BIOS does not rescan status of boot devices upon
	completion of POST.
Status:	Will not fix.

Revision 1.2	121
Order Number:	A85874-002