Intel SDS2 manual Can Not Change Bios Setup IDE Options Using Enter Key, Status Will Not Fix

Intel® Server Board SDS2		Errata Listing
Status:	Will Not Fix.

30.Can Not Change BIOS SETUP IDE Options Using <Enter> Key

Problem:	In SETUP, when attempting to change any option under the Primary/Secondary
	IDE controller sub-menu, one must use the space bar. The enter key does not
	function. The TPS does not mention having to use the SPACE bar to change
	the options.
Implication:	Possible confusion on how to select the options in the BIOS Setup IDE sub
	menu.
Workaround:	None.
Status:	Will not fix.

31.Minimum Wait Time Between Power Off and Power On via Front Panel Power Button Is One Second.

Problem:	Minimum wait time between power off and power on using the front panel power
	button on the SC5100 chassis is not documented.
Implication:	System will not respond to the power button until one second has elapsed.
Workaround:	Wait longer than one second when cycling the AC power via the front panel
	power button.
Status:	Will not fix.

32.Unable to boot Netware 6.0 (NW6) From CD ROM With Adaptec Adaptor 2100S in Slot 6.

Problem:	Unable to install or boot to NW6 from CD Rom with Adaptec SCSI Adaptor
	2100S installed in Slot 6. NW6 requires SP1 updated drivers to be installed.
Implication:	System hangs and fails to load drivers completely. Unable to boot to SSU floppy
	if NW6 CD is installed in CD-ROM drive.
Workaround:	Recommended installation methodology is to install from the Netware 6 SP1
	Overlay CD. This CD installs Netware 6 with all the SP1 fixes already
	incorporated.
	The SP1 Overlay CD is available from
	http://support.novell.com/filefinder/13659/index.html
Revision 1.2	123
	Order Number: A85874-002