Intel SDS2 manual Recovery Bios Post Codes, Beeps Reason

Intel® Server Board SDS2			BIOS
CP	Beeps	Reason
97		Fix up Multi Processor table
98	1-2	Search for option ROMs. One long, two short beeps on checksum failure
99		Check for SMART Drive
9A		Shadow option ROMs
9C		Set up Power Management
9D		Initialize security engine
9E		Enable hardware interrupts
A0		Set time of day
A2		Check key lock
A4		Initialize spermatic rate

Table 28. Recovery BIOS POST Codes

CP	Beeps	Reason
E0		Initialize chip set
E1		Initialize bridge
E2		Initialize processor
E3		Initialize timer
E4		Initialize system I/O
E5		Check forced recovery boot
E6		Validate checksum
E7		Go to BIOS
E8		Initialize processors
E9		Set 4 GB segment limits
EA		Perform platform initialization
EB		Initialize the hardware
EC		Initialize memory type
ED		Initialize memory size
EE		Shadow boot block
F0		Test system memory
F1		Initialize interrupt services
F2		Initialize real time clock
F3		Initialize video
F4		Initialize beeper
F5		Initialize boot
F6		Restore segment limits to 64 KB
F7		Boot mini DOS

Revision 1.2	49
Order Number:	A85874-002