SMC Networks SMC6724L3 manual Command Usage

CONFIGURING THE SWITCH

Command Usage

•You can enable or disable authentication messages via the Web interface.

•You can enable or disable authentication messages or link-up-down messages via the CLI.

Command Attributes

•Trap Manager Capability – This switch supports up to five trap managers.

•Trap Manager IP Address – Internet address of the host (the targeted recipient).

•Trap Manager Community String – Community string sent with the notification operation. (Range: 1-32 characters, case sensitive)

•Enable Authentication Traps – Issues a trap message whenever an invalid community string is submitted during the SNMP access authentication process.

Web – Click SNMP, SNMP Configuration. Fill in the IP address and community string box for each Trap Manager that will receive these messages, mark Enable Authentication Traps if required, and then click Add.

CLI – This example adds a trap manager and enables authentication traps.

Console(config)#snmp-server	host 10.1.19.23 batman	4-93
Console(config)#snmp-server	enable traps authentication	4-94

3-52