SMC Networks SMC6724L3 manual Flash/File Commands, Copy

FLASH/FILE COMMANDS

Example

Console#show version
Unit1
Serial number	:1111111111
Service tag	:
Hardware version	:R0A
Number of ports	:26
Main power status	:up

Redundant power status :not present

Agent(master)
Unit id	:1
Loader version	:1.0.0.0
Boot rom version	:1.0.0.0

Operation code version :1.0.1.3

Console#

Flash/File Commands

These commands are used to manage the system code or configuration files.

Command	Function	Mode	Page
copy	Copies a code image or a switch configuration to	PE	4-53
	or from flash memory or a TFTP server
delete	Deletes a file or code image	PE	4-56
dir	Displays a list of files in flash memory	PE	4-57
whichboot	Displays the files booted	PE	4-58
boot system	Specifies the file or image used to start up the	GC	4-59
	system

copy

Use this command to move (upload/download) a code image or configuration file between the switch’s flash memory and a TFTP server. When you save the system code or configuration settings to a file on a TFTP server, that file can later be downloaded to the switch to restore system operation. The success of the file transfer depends on the accessibility of the TFTP server and the quality of the network connection.

4-53