Genuine Miller Accessories
Water-Cooled TIG Torch Adapters
50 mm International with Water Return Line #195 377
For Maxstar 200, 300 and 350, Dynasty 200, 300 and 350, and Syncrowave 250 and 350. Used with (WP125, WP24W, WP25, WP20, WP18, WP12, CS310, CS410, WP22, WP27)
Order from Miller
Service Parts.
Replacement Water Hose for
Dinse Adapter #222 809
18 in (457 mm). Order from Miller Service Parts.
Water Hoses and Connectors
Coolants
Sold in multiples of four in
Low-Conductivity Coolant (Clear, Pre-Mixed) #043 810
For TIG and MIG applications. NOT for use in
Aluminum-Protecting Coolant (Green, Pre-Mixed) #043 809
With gas and water return line
50 mm International Flow Thru #195 380 For Econotig and Syncrowave 180 and
200.Used with (WP125, WP24W, WP25, WP20)
50 mm Thread
4
Water Hose Extension
#40V76R
Hose with two male 5/8 in 18 LH thread connections. Order from Miller Service Parts.
Water Coupler #057 020
Brass hose fitting with 5/8 in 18 LH thread. Order from Miller Service Parts.
Primarily used in
Replacement Filter Assemblies
#166 564 | #215 667 |
Filter | Filter |
Filter Assemblies
#166 564 For Coolmate 1, 3, V3 and 3X #215 667 For Coolmate 3.5
Order from Miller Service Parts.
Filter Strainer
#146 249 For Coolmate 4
Located inside pump assembly. See owner’s manual. Order from Miller Service Parts.