SMC Networks SMC6724L3 Show system, Show users, Use this command to display system information

SYSTEM MANAGEMENT COMMANDS

show system

Use this command to display system information.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Command Usage

•For a description of the items shown by this command, refer to “Displaying System Information” on page -12.

•The POST results should all display “PASS.” If any POST test indicates “FAIL,” contact your distributor for assistance.

Example

Console#show system

System description: TigerSwitch 10/100 Managed 24+2 L3 Switch

System OID string: 1.3.6.1.4.1.202.20.29 System information

System Up time: 0 days, 1 hours, 23 minutes, and 44.61 seconds

System Name	: [NONE]
System Location	: [NONE]
System Contact	: [NONE]
MAC address	: 00-30-f1-47-58-3a
Web server	: enable
Web server port	: 80
Ingress rate limit	: Disabled
POST result
Console#

show users

Shows all active console and Telnet sessions, including user name, idle time, and IP address of Telnet client.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

4-51