SMC Networks SMC6724L3 manual 139, Displaying Interfaces Attached to a Multicast Router

MULTICAST FILTERING

CLI – This example modifies the settings for multicast filtering, and then displays the current status.

Console(config)#ip igmp snooping		4-197
Console(config)#ip igmp snooping querier		4-201
Console(config)#ip igmp snooping query-count 10		4-202
Console(config)#ip igmp snooping query-interval 100		4-203
Console(config)#ip igmp snooping query-max-response-time 20		4-203
Console(config)#ip igmp snooping query-time-out 300		4-204
Console(config)#ip igmp snooping version 2		4-198
Console(config)#exit
Console#show ip igmp snooping		4-199
Igmp Snooping Configuration
----------------------------------------------
Service status	: Enabled
Querier status	: Enabled
Query count	: 10
Query interval	: 100 sec
Query max response time : 20 sec
Query time-out	: 300 sec
IGMP snooping version	: Version 2
Console#

Displaying Interfaces Attached to a Multicast Router

Multicast routers that are attached to ports on the switch use information obtained from IGMP, along with a multicast routing protocol such as DVMRP or PIM, to support IP multicasting across the Internet. These routers may be dynamically discovered by the switch or statically assigned to an interface on the switch.

You can use the Multicast Router Port Information page to display the ports on this switch attached to a neighboring multicast router/switch for each VLAN ID.

Command Attributes

•VLAN ID – ID of configured VLAN (1-4094).

•Multicast Router List – Multicast routers dynamically discovered by this switch or those that are statically assigned to an interface on this switch.

3-139