SMC Networks SMC6724L3 Map ip dscp Global Configuration, Map ip dscp Interface Configuration

PRIORITY COMMANDS

map ip dscp (Global Configuration)

Use this command to enable IP DSCP mapping (i.e., Differentiated Services Code Point mapping). Use the no form to disable IP DSCP mapping.

Syntax

map ip dscp no map ip dscp

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

•The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

•IP Precedence and IP DSCP cannot both be enabled. Enabling one of these priority types will automatically disable the other type.

Example

The following example shows how to enable IP DSCP mapping globally:

Console(config)#map ip dscp

Console(config)#

map ip dscp (Interface Configuration)

Use this command to set IP DSCP priority (i.e., Differentiated Services Code Point priority). Use the no form to restore the default table.

Syntax

map ip dscp dscp-value cos cos-value no map ip dscp

•dscp-value- 8-bit DSCP value. (Range: 0-255)

•cos-value- Class-of-Service value (Range: 0-7)

4-191