SMC Networks SMC6724L3 manual Probe-interval, 292, Ip dvmrp Show router dvmrp

COMMAND LINE INTERFACE

Related Commands

ip dvmrp (4-296)

show router dvmrp (4-298)

probe-interval

Use this command to set the interval for sending neighbor probe messages to the multicast group address for all DVMRP routers. Use the no form to restore the default value.

Syntax

probe-interval seconds

seconds - Interval between sending neighbor probe messages. (Range: 1-65535)

Default Setting

10 seconds

Command Mode

Router Configuration

Command Usage

Probe messages are sent to neighboring DVMRP routers from which this device has received probes, and is used to verify whether or not these neighbors are still active members of the multicast tree.

Example

Console(config-router)#probe-interval 30

Console(config-router)#

4-292