SMC Networks SMC6724L3 manual Setting the Switch’s IP Address, 176

BASIC CONFIGURATION

Web – Click System, Bridge Extension.

CLI – Enter the following command.

Console#show bridge-ext 4-176

Max support vlan numbers: 255

Max support vlan ID: 4094

Extended multicast filtering services: No

Static entry individual port: Yes

VLAN learning: IVL

Configurable PVID tagging: Yes

Local VLAN capable: No

Traffic classes: Enabled

Global GVRP status: Disabled

GMRP: Disabled

Console#

Setting the Switch’s IP Address

This section describes how to configure an initial IP interface for management access over the network. The IP address for this switch is unassigned by default. To manually configure an address, you need to change the switch’s default settings (IP address 0.0.0.0 and netmask 255.0.0.0) to values that are compatible with your network. You may also need to a establish a default gateway between the switch and management stations that exist on another network segment (if routing is not enabled on this switch).

3-17