SMC Networks SMC6724L3 manual Current status

PORT CONFIGURATION

•Speed-duplex– Shows the current speed and duplex mode. (Auto, or fixed choice)

•Capabilities – Specifies the capabilities to be advertised for a port during auto-negotiation. (To access this item on the Web, see “Configuring Interface Connections” on page 3-48.) The following capabilities are supported.

-10half - Supports 10 Mbps half-duplex operation

-10full - Supports 10 Mbps full-duplex operation

-100half - Supports 100 Mbps half-duplex operation

-100full - Supports 100 Mbps full-duplex operation

-1000full - Supports 1000 Mbps full-duplex operation

-Sym - Transmits and receives pause frames for flow control

-FC - Supports flow control

•Broadcast storm – Shows if broadcast storm control is enabled or disabled.

•Broadcast storm limit – Shows the broadcast storm threshold. (500 - 262143 packets per second)

•Flow control – Shows if flow control is enabled or disabled.

•LACP – Shows if LACP is enabled or disabled.

Current status:

•Link Status – Indicates if the link is Up or Down.

•Port Operation Status – Provides detailed information on port state.

•Operation speed-duplex– Shows the current speed and duplex mode.

•Flow control type – Indicates the type of flow control currently in use. (IEEE 802.3x, Back-Pressure or none)

3-65