SMC Networks SMC6724L3 manual Mac-address-table aging-time, Seconds Time in number of seconds

COMMAND LINE INTERFACE

Command Usage

•The MAC Address Table contains the MAC addresses associated with each interface. Note that the Type field may include the following types:

-Learned - Dynamic address entries

-Permanent - Static entry

-Delete-on-reset - Static entry to be deleted when system is reset

•The mask should be hexadecimal numbers (representing an equivalent bit mask) in the form xx-xx-xx-xx-xx-xx that is applied to the specified MAC address. Enter hexadecimal numbers, where an equivalent binary bit “0” means to match a bit and “1” means to ignore a bit. For example, a mask of 00-00-00-00-00-00 means an exact match, and a mask of FF-FF-FF-FF-FF-FF means “any.”

•The maximum number of address entries is 8191.

Example

Console#show mac-address-table
Interface	Mac Address	Vlan	Type
---------	----------------- ----		-----------------
Eth 1/ 1	00-e0-29-94-34-de	1	Delete-on-reset
Console#

mac-address-table aging-time

Use this command to set the aging time for entries in the address table. Use the no form to restore the default aging time.

Syntax

mac-address-table aging-time seconds no mac-address-table aging-time

seconds - Time in number of seconds (10-1000000).

Default Setting

300 seconds

Command Mode

Global Configuration

4-144