Panasonic DMC ZS10R, DMC-ZS10S TV, computer, printer continued, VIERA Link HDMI is not working

TV, computer, printer (continued)

VIERA Link (HDMI) is not working.

●Is the HDMI mini cable (optional) connected correctly? (→117)

→Check that the HDMI mini cable (optional) is fully inserted.

●Is the camera’s [VIERA Link] setting set to [ON]? (→47)

→The input setting may not be able to be changed automatically with certain television HDMI sockets. In this case, please change the input setting with your television’s remote control (consult your television’s operating instructions for details).

→Check the VIERA Link (HDMI) settings on the device you are connecting to.

→Turn the camera’s power off and on again.

→Turn the “VIERA Link control (HDMI device control)” setting on your television (VIERA) to off and then to on again. (Consult your VIERA’s operating instructions for details.)

Cannot send pictures to computer.

●Not connected correctly (→123).

●Check whether computer has recognized camera.

●Set [USB Mode] to [PC] (→46).

Computer does not recognize card (only reads built-in memory).

●Disconnect USB connection cable (supplied) and reconnect with card in place.

Computer does not recognize card. (When using an SDXC Memory Cards)

→Check whether your computer is compatible with SDXC Memory Cards. http://panasonic.net/avc/sdcard/information/SDXC.html

→A message prompting you to format the card may appear when you connect it. Do not format the card.

→If the [Access] indicator on the LCD monitor does not go off, turn off the camera’s power before disconnecting the USB connection cable.

Uploading to YouTube or Facebook cannot be performed properly.

→Confirm that the login information (login ID, user name, e-mail address and password) is correct.

→Confirm that the computer is connected to the Internet.

→Confirm that the resident software (such as anti-virus software and the firewall, etc.) is not blocking access to YouTube or Facebook.

→Check the YouTube or Facebook site.

Cannot print when connecting to printer.

●Printer not compatible with PictBridge.

●Set [USB Mode] to [PictBridge (PTP)] (→46).

The edges of pictures are cut off when printing.

●Release any trimming or edgeless printing settings on printer before printing. (Consult printer operating manual.)

●The pictures were recorded in aspect ratio.

→ If printing in shop, check if 16:9 sizes can be printed.

VQT3G90 139