Panasonic DMCZS10K, DMC-ZS10S, DMCZS10S, DMCZS10A Photo Frame, Underwater, High Speed, Movie

Taking pictures according to the scene

[Scene Mode] (Continued)

Recording Mode:

A frame is superimposed over the image.

Use cursor button to select the frame, and then press [MENU/SET].

[Photo Frame]	Notes	).
	• The recording pixel level is 2 M (
	• Guide lines cannot be displayed.

Achieve natural colors under water.

Tips

•For fast moving subjects, align with the AF area and press ◄ (AF Lock). (Press ◄ again to release.)

	[AF Lock]
	(focus fixed)
	AF area
[Underwater]	• If the zoom is operated after AF Lock is set, the AF Lock setting will be
	canceled and must be set again.

•AF Lock cannot be set if [AF Mode] is set to .

•Adjust the coloring with “White Balance fine adjustment” (→87).

Notes

•Always use marine case (optional).

•Positioning is not possible underwater, because the GPS signals cannot reach the camera.

Records rapid movements at a high speed of 220 fps.

Press the motion picture button to start recording

Press the motion picture button again to finish recording

•Motion picture recording can also be started or finished by pressing the shutter button.

•During playback, the movements of a subject that cannot be seen by the naked eye can be made recognizable by playing back the motion pictures using slow motion.

	Notes
[High Speed	• High-speed motion pictures cannot be recorded in the built-in memory.
Movie]	• They are recorded in [QVGA] of [Motion JPEG] motion pictures. (up to 2 GB,
	about 7 minutes 20 seconds at one recording.)

•No sound is recorded.

•Still pictures cannot be recorded while high-speed motion pictures are being recorded.

•The settings for the focus, zoom, exposure and White Balance are fixed to the settings specified when recording was started.

•The Optical Image Stabilizer does not work.

•The [AF Mode] is set to (1-area-focusing).

•Flickering or horizontal stripes may appear while recording under fluorescent lighting.

68 VQT3G90