Printing
You can connect directly to a
Getting Ready:
•Charge the battery sufficiently. Or, connect the AC adaptor (optional) and DC coupler (optional).
•When copying pictures from the
•Adjust the print quality or other settings on your printer, as needed.
•Do not disconnect the USB connection cable when the cable disconnection icon is displayed (may not be displayed with some printers).
Check socket direction and insert straight in. (Damage to socket shape can lead to faulty operation.)
USB connection cable (always use cable supplied)
Connect camera to printer
•Please make sure you use the supplied USB connection cable. Use of cables other than the supplied USB connection cable may cause malfunction.
Use cursor button on the camera to select [PictBridge (PTP)], and press [MENU/SET]
Use cursor button to select a picture to print and press [MENU/SET]
Use cursor button to select [Print start] and press [MENU/SET]
(Print settings (→129))
■To cancel print Press [MENU/SET]
●Do not use any other USB connection cables except the supplied one. ●Disconnect USB connection cable after printing.
●Turn off power before inserting or removing memory cards.
●When the battery begins to run out during communication, a warning beep sounds. Cancel printing and disconnect USB connection cable. Use a sufficiently charged battery or an AC adaptor (optional) and DC coupler (optional).
●AVCHD motion pictures cannot be printed.