Recording the place of recording with GPS
(Continued)
Recording Mode: 
Executing positioning immediately and updating your current location
If there is a discrepancy in the displayed information such as the location name or if positioning has failed, move to a place where the signals from the GPS satellite can be received more easily, and update the positioning.
Select [Repositioning] from the [GPS] menu
Positioning starts.
The GPS status indicator lights during positioning.
GPS status indicator
•When you select [GPS] or 
in the [GPS Setting] displayed in the Quick menu (→41) and close the Quick menu, positioning will be executed.
■Concerning the positioning intervals
Even if you do not manually update positioning, positioning is attempted automatically immediately after the power has been turned on and at a fixed intervals after that unless [GPS Setting] is [OFF].
When [GPS Setting] is [ON], positioning is tried at fixed time intervals even when the power is off.
However, positioning is canceled under the following conditions.
•When the battery power is low and 
has appeared.
•When the power has not been turned on for a certain length of time.
■To display the GPS reception status
Select [GPS Setting] from the [GPS] menu.
Use the cursor button to select [INFO] and press [MENU/SET].
•You can start positioning by pressing [MENU/SET] again. ●GPS reception status display
: Received GPS time
: Number of GPS satellite signals received
: Latitude Longitude
78 VQT3G90
