Using the AC adaptor (optional) and DC coupler (optional)
instead of the battery
By using the AC adaptor (optional) and DC coupler (optional), you can record and play back without worrying about the remaining battery charge.
The optional DC coupler can only be used with the designated Panasonic AC adaptor.
DC IN socket DC coupler
DC coupler cover
AC adaptor
Align the marks to connect
Insert DC coupler instead of battery (→12)
Open DC coupler cover
•If difficult to open, with the card/ battery door open, press the DC coupler cover from the inside to open it.
Plug AC adaptor into power outlet
Connect AC adaptor to DC IN socket of DC coupler
●Always use a genuine Panasonic AC adaptor (optional).
●Use the AC adaptor and DC coupler specifically for this camera. Using other adaptors or couplers could cause camera failure.
●It may not be possible to install camera on a tripod or unipod when the DC coupler is connected, depending on the type of tripod or unipod.
●When the AC adaptor is connected, always remove the AC adaptor when opening the card/battery door.
●Remove the AC adaptor and DC coupler when not in use and close the DC coupler cover.
●Also read the AC adaptor and DC coupler operating instructions.
VQT3G90 13