SMC Networks SMC6724L3 manual Show ip traffic, 229

IP ROUTING COMMANDS

Command Usage

If the address is specified without the netmask parameter, the router displays all routes for the corresponding natural class address (page 4-233).

Example

Console#show	ip route
Ip Address	Netmask	Next Hop	Protocol Metric Interface

--------------- --------------- --------------- ---------- ------ ---------

0.0.0.0		0.0.0.0	10.2.48.102	static	0	1
10.2.48.2		255.255.252.0	10.2.48.16	local	0	1
10.2.5.6		255.255.255.0	10.2.8.12	RIP	1	2
10.3.9.1		255.255.255.0	10.2.9.254 OSPF-intra		2	3
Total entry: 4
Console#
Field	Description
Ip	IP address of the destination network, subnetwork, or host. Note that
Address	the address 0.0.0.0 indicates the default gateway for this router.
Netmask	Network mask for the associated IP subnet.
Next Hop	IP address of the next hop (or gateway) used for this route.
Protocol	The protocol which generated this route information. (Values: static,
	local, RIP, OSPF)
Metric	Cost for this interface.
Interface	VLAN interface through which this address can be reached.

show ip traffic

Use this command to display statistics for IP, ICMP, UDP, TCP and ARP protocols.

Command Mode

Privileged Exec

Command Usage

For a description of the information shown by this command, see “Displaying Statistics for IP Protocols” on page 3-165.

4-229