SMC Networks SMC6724L3 C, 4-7, Exec Commands

E NTERING C OMMANDS
4-7
command classes and associated modes are displayed in the following
table:
Exec Commands
When you open a new console session on the switch with the user name
and password “guest,” the system enters the Normal Exec command
mode (or guest mode), displaying the “Console>” command prompt.
Only a limited number of the commands are available in this mode. You
can access all commands only from the Privileged Exec command mode
(or administrator mode). To access Privilege Exec mode, open a new
console session with the user name and password “admin.” The system
will now display the “Console#” command prompt. You can also enter
Privileged Exec mode from within Normal Exec mode, by entering the
enable command, followed by the privileged level password “super”
(page 4-34).
To enter Privileged Exec mode, enter the following user names and
passwords:
Class Mode
Exec Normal
Privileged
Configuration Global*Access Control List
DHCP
Interface
Line
Router
VLAN Database
* You must be in Privileged Exec mode to access the Global configuration mode.
You must be in Global Configuration mode to access any of the other configuration modes.
Username: admin
Password: [admin login password]
CLI session with the SMC6724L3 1 Switch is opened.
To end the CLI session, enter [Exit].
Console#