SMC Networks SMC6724L3 manual Client-identifier4-114hardware-address4-115

COMMAND LINE INTERFACE

is used (see page 3-178). This command is valid for manual bindings only.

•The no host command only clears the address from the DHCP server database. It does not cancel the IP address currently in use by the host.

Example

Console(config-dhcp)#host 10.1.0.21 255.255.255.0

Console(config-dhcp)#

Related Commands

client-identifier(4-114)hardware-address(4-115)

client-identifier

Use this command to specify the client identifier of a DHCP client. Use the no form to remove the client identifier.

Syntax

client-identifier {text text hex hex} no client-identifier

•text - A text string. (Range: 1-15 characters)

•hex - The hexadecimal value.

Default Setting

None

Command Mode

DHCP Pool Configuration

Command Usage

•This command identifies a DHCP client to bind to an address specified in the host command. If both a client identifier and hardware address are configured for a host address, the client identifier takes precedence over the hardware address in the search procedure.

4-114